ROCSAFE MX
Mobile Encrypted Hard Drive Enclosure
Rocsecure Rocsafe MX Mobile is the world’s first encrypted hard drive enclosure with FIPS level-2 Smartcard protection. It employs Real-Time Hardware Encryption and smartcard technology for authentication. Real-Time or “on-the-fly” encryption can encrypt and decrypt files transparently with no loss of performance. The files on the drive are accessible immediately after the key is entered without administrator access or software installation. It operates independently of the operating system.
A unique feature of Rocsafe MX Mobile is that it has an embedded keypad allowing you to key in your PIN directly onto the unit. This ensures protection from key-loggers that may be recording your keystrokes. Together with full disk encryption and smartcard based authentication, these features give you the ultimate level of protection with an unrivaled ease of use.
Rocsecure - Rocsafe MX is a hardware-based encryption device that secures data in a SATA hard disk drive against hackers and information-thieves. Uniquely designed as a bump-in-the-wire device on the SATA cable, the Rocsafe MX requires no mounting and simply plugs in-between the SATA connector on the motherboard and the hard disk drive. It operates transparently and encrypts all data written onto the hard disk without any loss in disk performance.
Rocsafe MX does not require any additional software drivers or applications to be installed and is a fully independent of the operating system. Once deployed, users would be assured that all the data on the Rocsafe MX is fully protected from unauthorized access in the event the hard disk is lost or stolen.
Regulatory Compliance
Rocsafe MX employs data encryption and pre-boot authentication allowing organizations to better protect and control access to their corporate and customer records, thus complying with regulations such as Sarbanes-Oxley (SOX), Health Insurance Portability and Accountability Act (HIPAA) and Gramm-Leach-Bliley, (GLB).
Real-time Hardware Encryption
Rocsecure - Rocsafe MX Mobile consists of eNova hardware-based encryption module that performs full disk operation, i.e. it encrypts every byte and every sector of data that is written onto the hard drive. Since encryption and decryption happens on-the-fly in hardware, there is no loss in disk performance.
Rocsafe MX hardware encryption has other advantages too. Since no software is required to be installed on the PC, you need not be concerned about Trojans/viruses or software upgrades. This reduces the total cost of ownership.
Two-factor Authentication
Rocsafe MX Mobile authenticates the user every time it is plugged into a PC. To give your data the highest level of security, it uses a smartcard. You not only need to insert a smartcard (“something you have”) but also need to key in a PIN (“something you know”) before the hard drive becomes accessible. This use of two factors for authentication gives you the same level of security offered by bank ATM’s cards.
A unique feature of Rocsafe MX Mobile is that it has an embedded keypad for PIN entry. Since the entering of the PIN is done on the unit and not on the PC, the Rocsafe MX is safe from Trojans and key-loggers that may be recording your keystrokes. Further, this feature allows for authentication before the PC detects the drive. This translates to complete operating system independence – the OS only sees the USB drive after successful authentication and is unaware that data is being transparently encrypted.
Real-time Encryption
Rocsecure’s Rocsafe MX has an eNova hardware-based cryptographic module that encrypts every single byte of data that is written onto the hard disk in a real-time without any loss in disk performance.
Pre-boot Authentication
Rocsafe MX authenticates the user every time the PC powers on or resumes from hibernation. The PC will only boot into the Operating System on the attached hard disk drive upon successful user authentication. Rocsafe MX offers two modes:
- Two-factor Authentication:
In this mode, the user is prompted for the KeyCrypt USB cryptographic token (something you have), as well as the password associated with the token (something you know). Rocsafe MX grants access only if the correct token and password is presented.
ROCSAFE MX
Mobile Encrypted Hard Drive Enclosure
Rocsecure Rocsafe MX Mobile is the world’s first encrypted hard drive enclosure with FIPS level-2 Smartcard protection. It employs Real-Time Hardware Encryption and smartcard technology for authentication. Real-Time or “on-the-fly” encryption can encrypt and decrypt files transparently with no loss of performance. The files on the drive are accessible immediately after the key is entered without administrator access or software installation. It operates independently of the operating system.
A unique feature of Rocsafe MX Mobile is that it has an embedded keypad allowing you to key in your PIN directly onto the unit. This ensures protection from key-loggers that may be recording your keystrokes. Together with full disk encryption and smartcard based authentication, these features give you the ultimate level of protection with an unrivaled ease of use.
Rocsecure - Rocsafe MX is a hardware-based encryption device that secures data in a SATA hard disk drive against hackers and information-thieves. Uniquely designed as a bump-in-the-wire device on the SATA cable, the Rocsafe MX requires no mounting and simply plugs in-between the SATA connector on the motherboard and the hard disk drive. It operates transparently and encrypts all data written onto the hard disk without any loss in disk performance.
Rocsafe MX does not require any additional software drivers or applications to be installed and is a fully independent of the operating system. Once deployed, users would be assured that all the data on the Rocsafe MX is fully protected from unauthorized access in the event the hard disk is lost or stolen.
Regulatory Compliance
Rocsafe MX employs data encryption and pre-boot authentication allowing organizations to better protect and control access to their corporate and customer records, thus complying with regulations such as Sarbanes-Oxley (SOX), Health Insurance Portability and Accountability Act (HIPAA) and Gramm-Leach-Bliley, (GLB).
Real-time Hardware Encryption
Rocsecure - Rocsafe MX Mobile consists of eNova hardware-based encryption module that performs full disk operation, i.e. it encrypts every byte and every sector of data that is written onto the hard drive. Since encryption and decryption happens on-the-fly in hardware, there is no loss in disk performance.
Rocsafe MX hardware encryption has other advantages too. Since no software is required to be installed on the PC, you need not be concerned about Trojans/viruses or software upgrades. This reduces the total cost of ownership.
Two-factor Authentication
Rocsafe MX Mobile authenticates the user every time it is plugged into a PC. To give your data the highest level of security, it uses a smartcard. You not only need to insert a smartcard (“something you have”) but also need to key in a PIN (“something you know”) before the hard drive becomes accessible. This use of two factors for authentication gives you the same level of security offered by bank ATM’s cards.
A unique feature of Rocsafe MX Mobile is that it has an embedded keypad for PIN entry. Since the entering of the PIN is done on the unit and not on the PC, the Rocsafe MX is safe from Trojans and key-loggers that may be recording your keystrokes. Further, this feature allows for authentication before the PC detects the drive. This translates to complete operating system independence – the OS only sees the USB drive after successful authentication and is unaware that data is being transparently encrypted.
Real-time Encryption
Rocsecure’s Rocsafe MX has an eNova hardware-based cryptographic module that encrypts every single byte of data that is written onto the hard disk in a real-time without any loss in disk performance.
Pre-boot Authentication
Rocsafe MX authenticates the user every time the PC powers on or resumes from hibernation. The PC will only boot into the Operating System on the attached hard disk drive upon successful user authentication. Rocsafe MX offers two modes:
- Single-Factor Authentication:
In this mode, the user is prompted for a password at the pre-boot stage after the power is turned ON. Rocsafe MX grants access to the user if the correct password is presented.
- Two-factor Authentication:
In this mode, the user is prompted for the KeyCrypt USB cryptographic token (something you have), as well as the password associated with the token (something you know). Rocsafe MX grants access only if the correct token and password is presented.
ROCSAFE MX
Mobile Encrypted Hard Drive Enclosure
Technical Specifications
| part numbers: |
K26MH5-56 |
K26MH7-56 |
K26MJ5-56 |
K26MJ7-56 |
K26MK5-56 |
K26MK5-56 |
| rotational speed: |
5400 rpm |
7200 rpm |
5400 rpm |
7200 rpm |
5400 rpm |
7200 rpm |
| Capacities |
Up to 500 GB securely in your pocket |
| Enclosure Type |
2.5” external enclosure-Pocket size |
| Bus Interface |
USB 2.0 and FireWire 800 (400) |
| Interface Transfer Rate |
USB up to 480 Mbits/s
FireWire up to 800 Mbits/s
|
| Compatible Drives |
2.5” SATA-1 and SATA-II |
| Encryption |
NIST certified AES hardware cipher engine Supported key strengths 128-bit or 256-bit |
| Operating Systems |
Operating System Independent, Windows 2000, Windows XP, Windows Vista, Linux |
| Pre-boot Authentication |
Password, Two-factor authentication with KeyCrypt USB cryptographic token |
| Smartcard Authentication |
Two-factor authentication with ISO7816, compliant smartcard |
| Cipher engine |
FIPS Level-2 Compliance (Certification for Rocsafe MX is in progress) |
| Certifications and Standards |
Designed to comply with FIPS 140-2 level-2
Supports SATA-I/II compliant hard disk drive - FCC and CE Compliance |
| Power |
5V - 400mA (excluding the power drawn by the HDD) |
| Dimensions |
~4.8 x 3.1 x 0.89 Inches 122 x 78 x 22 mm (LxWxH) |
| Weight |
~ 0.75 LB - 0.34 Kg |
Specifications and appearance are given as guidelines and may change without notice.
Capacity Disclaimer: Actual accessible hard drive capacity will indicate up to 10% lower than stated under different Operating Systems and formatting. Therefore, a 500GB capacity drive will show up as a 450GB drive (approximately.)
* Benchmarked with Intech Bench Test v3.5. Drive capacity might vary depending on Mac or PC format. |
ROCSAFE MX
Mobile Encrypted Hard Drive Enclosure
Product Images
ROCSAFE MX
Mobile Encrypted Hard Drive Enclosure
